PIR Stand-alone Sensor
Flat esthetical design, for both flush mount and surface mount. Extra “push” terminal, enable multiple function for push switch such as manual override, scenes recall, ect.
By using Casambi App, a variety of functionalities can be achieved, sensor group setup, sensor parameters setup, on/off, brightness adjustment, color tuning and scene selection. Mesh networking allows sensors to communicate with any other sensor (or Bluetooth device) with information relayed through other nodes within the same network. This enables extended range, flexibility, scalability and redundancy.
Similar products
Sensors
MAQ Air Quality Monitor
Advanced IOT system for air quality scanning, Lux sensor and push button panel for Casambi compatible products.
BERTRONIC SRL
Sensors
EMDCB
Self-powered and ceiling mounted motion detector with illumination sensor and NFC interface
EnOcean
Sensors
PD4-CAS-GH
Occupancy detector for surface mounting in large mounting heights with an external telescopic light sensor for a mounting height between 5 and 16 m (mechanically adjustable) for measuring the light according to the application.
B.E.G. Brück Electronic GmbH
Sensors
PD4-CAS-GH DALI-2
B.E.G.’s PD4-CAS-GH DALI-2 is a Casambi occupancy detector for surface mounting in large mounting heights. The detector has an integrated DALI-2 certified power supply with a guaranteed supply current of 80mA and is able to control up to 32 DALI drivers (depending on the drivers).
B.E.G. Brück Electronic GmbH