APT-CV4-VWC-LN-CVO
Multi-Channel Constant Voltage Control
APT-CV4-VWC-LN-CVO controllers match perfectly with multi-channel LED rolls that require constant voltage inputs. The controllers enable independent control over 4 constant voltage LED channels using a standard constant voltage driver and can be configured to control overall intensity and CCT. The 4 channel APT-CV4-VWC-LN-CVO is designed to enable an intelligent RGBW system.
Features
- Independent control of up to 4 constant voltage LED channels with a standard CV driver
- No auxiliary power required
- No perceivable flicker
- Programmable dim-to-off, CCT range, CCT mapping, intensity mapping
- Linear form factor
Technical Facts
- 4 channels
- 100W Max Power
- 12-60V
- Casambi BLE Control Protocol
Similar products
Control gear
Integral R1
A versatile wireless relay engineered for effortless integration into Casambi networks. Designed for high-performance switching of up to 10A output with 250A inrush.
Versaan
Control gear
CBU-A2D-20-TRACK
The A2D controller performs two functions at once: It creates a wireless CASAMBI network node and a wired DALI infrastructure serving up to 10 luminaires. The device has a built-in DALI power supply giving 20mA of control current to your luminaires.
LIGHTWORKS
Control gear
CBU-DA-TRACK-230
The controller plugs directly into the 3-phase bus + DALI line (Global XTSC standard). After plugging into the bus and performing the addressing procedure, up to 50 LED luminaires organized into up to 8 control groups can be controlled. It is worth noting that this product supports profiles such as DALI D4i up to 8 addresses; DALI Broadcast, DALI DT6, DALI DT8, DALI Gateway.
LIGHTWORKS
Control gear
CBU-1032-70-TRACK 230
The Salvador 1000 Controller (Gateway) performs two functions at once: It creates a wireless CASAMBI network node and a wired DALI infrastructure supporting up to 32 addresses. Included is a DALI power supply that powers the gateway and gives 70mA of current to your fixtures.
LIGHTWORKS