CAS-UNI-NEMA-5P-81-DA

CAS-UNI-NEMA-5P-81-DA is one of OLFER Casambi outdoor control nodes.

This type is compatible with standard NEMA sockets (ANSI 136.41) and enables easy autonomous control and dimming of DALI devices (drivers, electronic ballasts, etc.).

It is provided with an IP66, UV resistant, IK09 enclosure.

Electrical connection and mechanical fixing are done by twist and lock, without tools.

Main use is control of outdoor lighting applications. By use of CASAMBI APP it is possible to group the luminaries by streets or areas, set dimming levels based on the time, schedule special events for specific dates, etc. Remote control of the installation is also possible through the cloud by use of an internet connected device with Casambi App set up as gateway.

Communication range between control units is up to 70m outdoors without obstacles (BLE4), and can be over 200m in BLE5 Long range type nets. Adding the control units to a net must be done individually with a mobile phone or tablet within range of each unit. For further installation setup and programming it is only necessary to be within the range of one of the control units.

Diverse operating modes are possible (on/off, dimming 0-100%, circadian control, tunable white, RGB. RGBW, etc.).

Different DALI communication profiles can be configured to match the drivers/ballast requirements (see profile list in product datasheet).

Control unit temperature can be monitored in the App. Also internal data of DALI D4i drivers (power, etc).

It is compatible with other CASAMBI inside and CASAMBI ready products such as luminaries, presence and light sensors, relays, actuators, push buttons, etc.

CAS-UNI-NEMA-5P-81-DA features smart switching capability. It is possible to activate preset scenes or modes by flicking the power supply off and on..

Also an external DALI-2 motion/light sensor can be connected to the DALI bus and will appear as a Casambi sensor in the App (with some specific profiles). Internal temperature can also be monitored.
CAS-UNI-NEMA-5P-81-DA is IoT ready. It can receive information provided by a DALI D4i driver or ballast (power consumption, working hours, accumulated energy consumption, temperature, etc.) which can be sent to Casambi cloud through a Gateway device with internet connection and Casambi App set up as gateway. Access to this big data to exploit this information is possible through API and JSON protocol.

OLFER Casambi outdoor control nodes range:

• Nominal line voltage: 110-277Vac
• Input voltage range: 85-305Vac
• Frequency: 47-60Hz
• Power consumption standby: <0,8W@230Vac
• Power consumption: <1W @230Vac
• Output control interface: DALI/DALI-2
• Integrated DALI voltage source: 16Vdc (isolated from mains)
• DALI output current: 100mA max.
• LOAD output current: 5A max.
• Dimming range: 0-100%
• RF communication interface: Bluetooth 4.0 or 5.0 Low energy (BLE)
• RF communication protocol: Casambi
• Protections: Line permanent overvoltage, line surge overvoltage, temperature
• Temperature monitoring: Internal temperature is displayed in Casambi App
• Operating temperature range: -40º to +80ºC
• Dimensions: Diameter 88mm. Height 63mm
• IP: 66
• Connector: NEMA 5P (ANSI C136.41)

Read More