Interface Dali/0-10V
Sends DALI DT6 & DT8 and 0-10 V at SEC OUT. Configuration of the other interface types (DALI: TW, RGB, RGB+W, 1..4 Ch, 0-10 V) possible before coupling to the network: Change profile. Use of the switched mains output depending on the selected profile. The use of the switched mains output is only permitted with relays! At 0-10 V: Complete switch-off via relay. In built-in housing or with independent housing with terminal cover (protection class: 2).
- supply input: 220..240V; 50Hz
- radio signal: 2.4..2.483 GHz; 4dBm
- signal output: DALI / 0-10V, max 7mA; SELV
- Ambient temperature (ta): -20..+40 °C
- Max. design temperature (tc): 70℃
- short circuit protection
- Dimensions: 75x38x22mm
Similar products
Control gear
CBU-DA-1P
CBU-DA-1P. Casambi enabled DALI controller. This module is able to control up to 50 DALI drivers grouped into up to 8 different DALI groups. CBU-DA-1P is also compatible with DALI-2 presence/light sensors and push button couplers.
ELECTRÓNICA OLFER
Control gear
VBU-K2C-W-BI
VBU-K2C-W-Bl is a bridge box between KNX and CASAMBl network, which realizes KNX System and CASAMBl network interconnection.
VLINCA
Control gear
VBU-D-ITL
a DALI controller for CASAMBI wireless, long-range network, with different fixture profile configuration, it can control up to 1~8 DALI devices individually, or 1-8 groups of DALI devices.
VLINCA
Control gear
VBU-DS-IDP-W
Temperature protection as per EN61347. Wireless controllable with an Android / iOS smart device, forms automatically a wireless communication network with up to 100 nodes.
VLINCA