OT WI 15/220-240/1A0 NFC CA LP I
Features
- Very wide operating window
- NFC interface for fast programming, including box programming
- High quality amplitude dimming
- Low stand-by consumption
- Suitable for emergency lighting
- With cable clamps for independent installation
- Up to 100K hrs lifetime @ Tc – 10°
Technical facts
- Maximum output power 18W
- Output current range 150 – 1050mA
- Output voltage range 10 – 54V
- Networked stand-by power 0.15W max
- Dimming range 1 – 100%
- Dimensions 150mm x 43mm x 22mm
Similar products
Drivers
LCC9WCM
The Casambi controllable LCC9WCM is used to both drive and dim LEDs up to 9W. Depending on the configuration, the LCC9WCM can control different values for constant voltage (CV) and constant current (CC).
Vadsbo
Drivers
ID ELNCB 36/230/050-400 BH16 NFC CS
ID ELNCB 36/230/050-400 BH16 NFC CS is Non-SLVE Linear constant current 36W LED driver.50-137 V,50-400 mA, with high efficiency of 91%. Independent use, supports NFC programmers for precise setting and control of multiple functions.
CUPOWER
Drivers
ID ECSCB 28/230/150-700 BH21 NFC CS
ID ECSCB 28/230/150-700 BH21 NFC CS is SLVE compact constant current 28W LED driver.15-52 V,150-700 mA, with high efficiency of 90%. Independent&built-in use, supports NFC programmers for precise setting and control of multiple functions.
CUPOWER
Drivers
ID ECSCB 42/230/300-1050 BH21 NFC CS
ID ECSCB 42/230/300-1050 BH21 NFC CS is SLVE compact constant current 42W LED driver.15-52 V,300-1050 mA, with high efficiency of 92%. Independent&built-in use,supports NFC programmers for precise setting and control of multiple functions.
CUPOWER