PROFESSIONALE CASAMBI TW

PROFESSIONALE CASAMBI TW (127646) is a direct current wireless dimmable electronic driver.

  • Single current LED driver with integrated wireless CASAMBI.
  • IP20 independent driver, for indoor use.
  • Class II protection against electric shock for direct or indirect contact.
  • Active Power Factor Corrector.
  • Current regulation ±5 % including temperature variations.
  • Input and output terminal blocks on opposite sides (wire cross-section up to 1,5 mm2 / AWG15).
  • Clamping screws on primary and secondary circuits for cables with diameter: min. 2 mm – max. 9 mm
  • Driver can be secured with slot for screws.
  • Protections: against overheating and short circuits, against mains voltage spikes, against overloads.
  • Thermal protection = C.5.a.
  •  Light regulation 0/1 – 100 % by means of PUSH SWITCH function and APP or compatible devices for CASAMBI integrated WIRELESS module.
  • Default dimming AM+PWM: 1-12,5% PWM 2 kHz+12,5-100% AM.

Read More

  • Rated Voltage: 220 ÷ 240 V
  • Frequency: 50-60 Hz
  • AC Operation range: 198 ÷ 264 V
  • DC Operation range: 176 ÷ 275 V
  • Power: 3 ÷ 20 W
  • iTHD: ≤ 10%
  • Output current ripple: ≤ 3%
  • Max. pcs for CB B16A: 50 pcs
  • In rush current: 5A 50μsec

Similar products

Drivers

LCC9WCM

The Casambi controllable LCC9WCM is used to both drive and dim LEDs up to 9W. Depending on the configuration, the LCC9WCM can control different values for constant voltage (CV) and constant current (CC).

Vadsbo

New

Drivers

ID ELNCB 36/230/050-400 BH16 NFC CS

ID ELNCB 36/230/050-400 BH16 NFC CS is Non-SLVE Linear constant current 36W LED driver.50-137 V,50-400 mA, with high efficiency of 91%. Independent use, supports NFC programmers for precise setting and control of multiple functions.

CUPOWER

New

Drivers

ID ECSCB 28/230/150-700 BH21 NFC CS

ID ECSCB 28/230/150-700 BH21 NFC CS is SLVE compact constant current 28W LED driver.15-52 V,150-700 mA, with high efficiency of 90%. Independent&built-in use, supports NFC programmers for precise setting and control of multiple functions.

CUPOWER

New

Drivers

ID ECSCB 42/230/300-1050 BH21 NFC CS

ID ECSCB 42/230/300-1050 BH21 NFC CS is SLVE compact constant current 42W LED driver.15-52 V,300-1050 mA, with high efficiency of 92%. Independent&built-in use,supports NFC programmers for precise setting and control of multiple functions.

CUPOWER

New
View all