CAS-ZG-40-DA-LX

• CAS-ZG-40-DA-LX controller enables easy control of DALI devices (drivers, electronic ballasts, etc.).
• It is a bus powered DALI controller, this means that an external DALI bus power supply must be used (DALI PS, D4i Driver, etc.).
• Setup and communication with other control devices is done using Bluetooth low Energy (BLE).
• Configuration and control can be done from a mobile phone or tablet using the free Casambi APP.
• Electrical connection and mechanical fixing are done through a Zhaga compatible base by twist and lock, without tools. The enclosure is IP66, UV resistant.
• Diverse operating modes are possible (on/off, dimming 0-100%, circadian control, tunable white, RGB, RGBW, etc.).
• Different profiles are available to match the DALI driver and luminary requirements (see fixture profile list).
• It is compatible with any other devices from other manufacturers which also incorporate CASAMBI inside and CASAMBI Ready products like luminaries, motion sensors, relays, actuators, push buttons, etc.
• CAS-ZG-40-DA-LX features a light sensor which can be configured in Casambi App to set specific illuminance levels for energy saving, or used in daylight controlled basic scenes for switching the lights on/off. Also an external DALI-2 motion/light sensor can be connected to the DALI bus and will appear as a Casambi sensor in the App (with some specific profiles).
• The Auxiliary output can control a 24VDC Relay or other load types. Internal temperature can be monitored in the APP.
• Range between controllers in outdoors with direct line of sight and without obstacles, is up to 70m in Balanced BLE4.0 type nets, and can be over 200m in BLE5.0 Long range type nets.

Read More