DC MAXI JOLLY US
- DC MAXI JOLLY US CASAMBI (127644) is a multipower driver supplied with dip-switch for the selection of the output current with integrated wireless CASAMBI module.
- IP20 independent driver, for indoor use.
- Class II protection against electric shock for direct or indirect contact.
- Active Power Factor Corrector.
- Analogical input (NTC) for thermal sensor connection. Auxiliary output 12 V max. 100 mA.
- Current regulation ±5 % including temperature variations. Input and output terminal blocks on the same side (wire cross-section up to 2,5 mm2 / AWG13).
- Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm – max. 8 mm.
- Protections: against overheating and short circuits, against mains voltage spikes, against overloads.
- Thermal protection = C.5.a.
Light regulation 0/0,5 – 100 % by means of PUSH function and APP or compatible devices for CASAMBI integrated WIRELESS module
- Rated Voltage: 110 ÷ 127 V 220 ÷ 240
- Frequency: 50-60 Hz
- AC Operation range 99 ÷ 264 V
- DC Operation range 170 ÷ 276 V
- Power: 1 ÷ 60 W
- iTHD: ≤ 10%
- Output current ripple: ≤ 3%
- Max. pcs for CB B16A: 30 pcs
- In rush current: 10A 200μsec
1.5 W - 12 W , LED Driver for 150 - 300 mA, Integrated CASAMBI Module, Tunable White, NFC, Built-in type with double or reinforced insulation, Optional with strain relief for independent installation, with low ripple.
HEP TECH CO.
The HDL35CB is a single color/CCT compatible constant current driver. The rated current, on/off fade time, current trim and dimming curve can be set in the app and it's physically flicker free throughout the whole dimming range.
MD400CB is a 48Vdc powered master driver to work with the compatible slave drivers. It can output DC 48V power with digital power line communication (PLC) commands to drive and control slave drivers. Besides dimming and color adjusting, the LED rated current, fade time, current trim level, dimming curve and group features are adjustable from the Casambi app.
- Independent dimmable constant current 2-channel LED Driver - Protections: open circuit, short circuit, overload, over temperature - Suitable for protection class II luminaires - Protection class II - ERP compatible - SELV
Xiamen AcTEC Electronics Co.