Dimmer switch DK, Bluetooth®, 2-fold with symbols
With this 2-fold wireless and battery-free dimmer, developed for the Danish market, you can remotely control Bluetooth® low-energy 2.4 GHz wireless receivers located in the same room. Examples include lighting fixtures that are Casambi® Ready. Follow the guidelines for installation and wireless communication for best results. It is not necessary to break down walls or pull cables. The dimmer switch can be mounted on a Danish wall box, screwed to the wall, or glued to a flat surface with double-sided adhesive tape. The cover with symbols is included. The Danish frame must be ordered separately.
- Article number: 72-513
- Dimensions: 44,4 x 44,5 x 16 mm
- Power supply: integrated kinetic energy harvester
- RF protocol: Bluetooth® Low Energy (BLE)
- Configuration interface: NFC Forum Type 2 Tag
- Modulation: Gaussian frequency-shift keying
- Operating frequency: 2402 MHz .. 2480 MHz
- Mounting height: 110 cm
- Temperature (storage / operating): -25°C – +65 °C
- Maximum range: up to 10 m (indoor to first receiver)
- Maximum RF power: 0,4 dBm
- Antenna: Integrated antenna
- Protection degree: IP20
- Marking: CE
Similar products
Switches
Touchpanel Arca PRO
Elegant touch panel for controllingl scenes and groups
Arditi
Switches
Lepuk
Remote control for 4 Channels
Arditi
Switches
Arca ECO
Rotary switch for controlling scenes and groups
Arditi
Switches
CASA Connect 4 Buttons
The CASA Connect 4 Buttons is a button interface module for connecting up to 4 buttons. It is suitable for mounting in a flush-mounted box. The interface is a member of the Casambi family and can be easily integrated into the network via the app.
RP-Technik