MOAC-L-CSB-1
The MOAC-L-CSB-1 is a 3-wire AC motor controller with Casambi integration.
The controller is calibrated within the software to set the upper (open) and lower (closed) limits, then using the integral timer movement, the shade can be set anywhere within the limits.
- AC Motor Control
- Single Channel
- Can be used with momentary switch
- Up to 75m range in direct line of sight
- 3 wire
- 120-277VAC input
- 120-277VAC output
- 20mA Max. mains current (excluding relay outputs)
- 5A Max. continuous current per relay
- 162.2mm x 35mm x 33mm
All of Eulum Design’s Casambi enabled products use a unique radio tuned for maximum performance
Similar products
Control interfaces
IC-A528-B-DA/0-10V-CW-CS
Circular smart controller for wireless control of lighting fixtures, which can adapt to LED drivers with D4i, DALI, 0-10V protocols by changing the profile and wiring method.
CUPOWER
Control interfaces
NAPPK DALI-0-10V-PWM-2CH-CAS
NAPPK DALI-0-10V-PWM-2CH-CAS is wireless control unit boasts two PWM dimmers for your 12…48 Vdc LED strips，well as two 0…10 V dimming outputs and one DALI dimming output；Maximum Output current per channel 6A. The total output current does not exceed 9A.
CUPOWER
Control interfaces
IC ECSCB 100-277 DRY 4IN CS
IC ECSCB 100-277 DRY 4IN CS integrated wireless module for wireless ecosystem,4-way button interface for other controlling wireless-capable devices.
CUPOWER
Control interfaces
NAPPK PWM5CH-CAS
NAPPK PWM5CH-CAS is Constant Voltage LED Driver.This wireless control unit boasts five PWM dimmers for your 12-48VDC LED strips Maximum Output current per channel 6A. The total output current does not exceed 9A.
CUPOWER