MVPowerTrack- 3 In Track driver 300-1050mA Casambi Control driver.
MVPowerTrack is a constant current in track LED driver with Casambi wireless control, on board DIP switch enable selection of the output current.
- Minimal design enables compact design of track fixtures
- Compatible with all standard 3 phase track systems
- Wirelss Casambi Control
- Up to 42w
- Protection against overheating and short circuits, against mains voltage spikes, against overloads.
- Easy to mount through inventive nipple design.
- Dim rage 100% to 1%
- Flicker Free
- Output Type: Constant Current
- Dimming Type : Bluetooth
- Dimming Range : 1% – 100%
- Output Features: Isolation
- IP Grade:IP20
- Insulation Class:Class II
- Rated Input Voltage:220- 240VAC
- Output Voltage : 20-42V
- Output Current : 300-1050mA
- Input Curent :≤0.28A(230VAC,full load)
1.5 W - 12 W , LED Driver for 150 - 300 mA, Integrated CASAMBI Module, Tunable White, NFC, Built-in type with double or reinforced insulation, Optional with strain relief for independent installation, with low ripple.
HEP TECH CO.
The HDL35CB is a single color/CCT compatible constant current driver. The rated current, on/off fade time, current trim and dimming curve can be set in the app and it's physically flicker free throughout the whole dimming range.
MD400CB is a 48Vdc powered master driver to work with the compatible slave drivers. It can output DC 48V power with digital power line communication (PLC) commands to drive and control slave drivers. Besides dimming and color adjusting, the LED rated current, fade time, current trim level, dimming curve and group features are adjustable from the Casambi app.
- Independent dimmable constant current 2-channel LED Driver - Protections: open circuit, short circuit, overload, over temperature - Suitable for protection class II luminaires - Protection class II - ERP compatible - SELV
Xiamen AcTEC Electronics Co.