PROFESSIONALE HC CASAMBI

PROFESSIONALE HC CASAMBI (127660) is a multipower driver supplied with dip-switch for the selection of the output current with integrated wireless CASAMBI receiver.
IP20 independent driver, for indoor use.
Class II protection against electric shock for direct or indirect contact
Active Power Factor Corrector.
Current regulation ±5 % including temperature variations.
Input and output terminal blocks on opposite sides (wire cross-section up to 1,5 mm2 / AWG15).
Clamping screws on primary and secondary circuits for cables with diameter: min. 2 mm – max. 9 mm.
Driver can be secured with slot for screws.
Protections: against overheating and short circuits against mains voltage spikes, against overloads.
Thermal protection = C.5.a.
Light regulation 0/1 – 100 % by means of PUSH SWITCH function and APP or compatible devices for CASAMBI integrated WIRELESS module.

Rated Voltage: 220 ÷ 240 V
Frequency: 50-60 Hz
AC Operation range: 198 ÷ 264 V
DC Operation range: 176 ÷ 275 V
Power: 5 ÷ 45 W
iTHD: ≤ 10%
Output current ripple: ≤ 3%
Max. pcs for CB B16A: 50 pcs
In rush current: 5A 50μsec

Similar products

Drivers

HDN20CB 20W 2-in-1 Smart Driver

HDN20CB is a single color/CCT 2-in-1 constant current driver. The rated current, on/off fade time, current trim and dimming curve can be set from app and it's physically flicker free in whole dimming range.

Rayrun

New

Drivers

SKD CRP 15/220-240/400 CS TW

Casambi-Ready future proof SELV compact constant current 15W LED driver, with wide operating window and slim profile housing for built-in and remote installations. Low ripple for the Flicker-free, and the multi-current selection by the DIP solution.

SKD Lighting (Zhongshan) Technology Co.

New

Drivers

TLSI-XXWXXXX-BXF-I03

Smart Driver with quick terminal

Up-Shine Lighting Co.Limited

New

Drivers

VSI-XXWXXXX-B1-I03

Smart Driver with constant current

Up-Shine Lighting Co.Limited

New

View all