Push/Switch Actuator 10A

The AIMOTION switch actuator controls individual luminaires and devices in the Bluetooth Low Energy Mesh network without the use of gateways, routers, repeaters or extra cabling. Configuration and selection of the appropriate profile for the different operating modes (pushbutton actuator, switch actuator and switch actuator for sensitive devices) is carried out wirelessly via the Casambi App. The installation may only be carried out by a qualified electrician.

Features

  • Selectable operating mode: pushbutton actuator, switch actuator and switch actuator for sensitive devices
  • Wireless control via app, wall switch and motion detector
  • Automatic switching on and off according to time, weekday, date or sunshineli
  • Group functions
  • Integration in scenes and animations
  • Group function
  • iBeacon can be activated

Read More

 

Similar products

Control gear

CBU-DA-TRACK-230

The controller plugs directly into the 3-phase bus + DALI line (Global XTSC standard). After plugging into the bus and performing the addressing procedure, up to 50 LED luminaires organized into up to 8 control groups can be controlled. It is worth noting that this product supports profiles such as DALI D4i up to 8 addresses; DALI Broadcast, DALI DT6, DALI DT8, DALI Gateway.

LIGHTWORKS

New

Control gear

CBU-1032-70-TRACK 230

The Salvador 1000 Controller (Gateway) performs two functions at once: It creates a wireless CASAMBI network node and a wired DALI infrastructure supporting up to 32 addresses. Included is a DALI power supply that powers the gateway and gives 70mA of current to your fixtures.

LIGHTWORKS

New

Control gear

CBU-1016-40-TRACK 230

The Salvador 1000 Controller seamlessly integrates wireless CASAMBI technology with a wired DALI system. This versatile gateway enables wireless control while supporting up to 16 DALI addresses. It includes a built-in DALI power supply, powering both the gateway and providing 40mA of current for your fixtures.

LIGHTWORKS

New

Control gear

VBU-PWM5-IDP

VBU-PWM5-IDP is a Bluetooth controllable, Casambi enabled 5 channel PWM dimmer for constant voltage LED loads, such as LED strips and constant voltage LED modules. It can be configured with 3 different fixture profile for 1,2,5-channel applications (dimming, tunable white, RGBCW). The maximum output current is 13A which can be divided between 1-5 channels.

VLINCA

New