Push/Switch Actuator 10A Volt Free
The AIMOTION switch actuator controls individual luminaires and devices in the Bluetooth Low Energy Mesh network without the use of gateways, routers, repeaters or extra cabling. Configuration and selection of the appropriate profile for the different operating modes (pushbutton actuator, switch actuator and switch actuator for sensitive devices) is carried out wirelessly via the Casambi App. The installation may only be carried out by a qualified electrician.
Features
- Selectable operating mode: pushbutton actuator, switch actuator and switch actuator for sensitive devices
- Volt free Switching, normally open
- Wireless control via app, wall switch and motion detector
- Automatic switching on and off according to time, weekday, date or sunshineli
- Group functions
- Integration in scenes and animations
- Group function
- iBeacon can be activated
Similar products
Control gear
CBU-1032-70-TRACK 230
The Salvador 1000 Controller (Gateway) performs two functions at once: It creates a wireless CASAMBI network node and a wired DALI infrastructure supporting up to 32 addresses. Included is a DALI power supply that powers the gateway and gives 70mA of current to your fixtures.
LIGHTWORKS
Control gear
CBU-1016-40-TRACK 230
The Salvador 1000 Controller seamlessly integrates wireless CASAMBI technology with a wired DALI system. This versatile gateway enables wireless control while supporting up to 16 DALI addresses. It includes a built-in DALI power supply, powering both the gateway and providing 40mA of current for your fixtures.
LIGHTWORKS
Control gear
VBU-PWM5-IDP
VBU-PWM5-IDP is a Bluetooth controllable, Casambi enabled 5 channel PWM dimmer for constant voltage LED loads, such as LED strips and constant voltage LED modules. It can be configured with 3 different fixture profile for 1,2,5-channel applications (dimming, tunable white, RGBCW). The maximum output current is 13A which can be divided between 1-5 channels.
VLINCA
Control gear
VBU-R1-BI
VBU-R1-BI is a 1 channel Bluetooth relay used to switch on and off different load types(e.g LED driver, electric fan and incandescent lamp) up to breaking capacity of 11A.
VLINCA