Wireless Room Controller
The ZBA-E001B not only provides wireless control to the luminaries. It also provides On/Off and versatile PWM/ 0-10V analog dimming controls. The wide range AC input from 110VAC to 277VAC solved the problem during field installations. It’s compact form-factor gives fixture manufactures an easier way to adapt during this designing stage. The isolated 12/ 24VDC output provides source voltages for low voltage occupancy and/ or photo sensors. Tethered with ZBA-E001B, you can turn non-wireless sensor into Casambi ready sensor to join the network.
- Input: 110 – 277VAC/ 50 – 60Hz
- Output via Isolated reply: 110 – 277VAC/ 50 – 60Hz, 10 Amps Max.
- Low Voltage Output: 12 or 24VDC
- 50mA
- Sensor Support : Occupancy Sensor Linear Sensor
- Operating Environment: -20 to +65°C
- Radio Properties : 2.4GHz, +19.5dBm Transmit Power
- Antenna: Built-in and External
- External Antenna: Optional with connector
- Dimming Control : 0-10VDC
- Dimension: 131.5mm x 39.0mm x 29.0mm (L x W x H)
- Compliance : ETL/ FCC Certified
- Warranty : 5 YEAR
Similar products
Control gear
UP-CZ01
UP-CZ01 is a CASAMBI ready wireless control device for LED driver, designed based on ZHAGA BOOK18 interface standard.
AGC Lighting Co.Ltd
Control gear
XB50
XB50 LED controller is a multi-function CV LED controller, it can drive voltage LED products from single color to RGB+CCT constant in voltage range of DC 8-50V. The fading speed and PWM frequecny can be adjusted from app. It has full protection function to ensure the safety, and with push cable connectors, the installation will be simple and reliable.
Rayrun
Control gear
HCB10
HCB10 is a Casambi to Dali adaptor with Dali power supply. It's powered by AC100-240V and can work as single color or CCT profile. It has bulit-in Dali power supply. User can wire the HCB10 output dali bus to driver’s dali bus input and achieve the powerful Casambi app control function.
Rayrun
Control gear
Interface Dali/0-10V
Interface for convenient operation with smart devices for controlling LED power supplies with DALI or 0-10 V signal input
Arditi