CAS-24V-ZHAGA-4P-40-DA

CAS-24V-ZHAGA-4P-40-DA is one of OLFER Casambi outdoor control nodes.

This type is compatible with ZHAGA Book 18 sockets and enables easy autonomous control and dimming of DALI devices (drivers, electronic ballasts, etc.)

It is provided with an IP66, UV resistant, IK09 enclosure. Electrical connection and mechanical fixing are done by twist and lock, without tools.

The main use is control of outdoor lighting applications. By use of Casambi App it is possible to group the luminaries by streets, set dimming levels based on the time, schedule special events for specific dates, etc. Remote control of the installation is also possible through the cloud by use of an internet-connected device with Casambi App set up as a gateway.

The communication range between control units is up to 70m outdoors. Adding the control units to a net must be done individually with a mobile phone or tablet within range of each unit. For further installation setup and programming it is only necessary to be within the range of one of the control units.

Diverse operating modes are possible (on/off, dimming 0-100%, circadian control, tunable white, etc.).

Different DALI communication profiles can be configured to match the luminaire requirements (see profile list in product datasheet).

Control unit temperature can be monitored in the App. Also internal data of DALI D4i drivers (power, etc).

It is compatible with other CASAMBI inside and CASAMBI ready products such as luminaries, presence and light sensors, relays, pushbuttons, etc.

CAS-24V-ZHAGA-4P-40-DA is IoT ready. It can receive information provided by the associated driver or ballast (power consumption, temperature, etc.) which can be sent to Casambi cloud by a device with an internet connection and Casambi App set up as a gateway. Access to this big data is possible through API and JSON protocol to exploit this information.

Similar products

Modules

EVB-CBM002A

EVB-CBM002. Casambi CBM-002 module evaluation board

Olfer

New

Modules

CI4/DALI Input Controller

The CI4/DALI is a DALI push button coupler as well as a Casambi wireless push button. It has 4 potential-free inputs that can be connected either to a DALI circuit or to a Casambi network, depending on requirements.

MTC maintronic GmbH

New

Modules

10cas

10cas allows for up to two 0-10VDC analog signals to be mapped as Casambi switches, to allow external analog controllers to command a Casambi network.

DMX

New

Modules

DMXcas

DMXcas is the inverse to casDMX, creating a true DMX > Casambi > DMX ecosystem.

DMX

New

View all